LFB Mercedes Vito 2014-2024 40Pin Quadlock Multilead lose
EAN: 4026724674361
42xmc011-0
Steering wheel controls adapter
Compatibility: Mercedes
Mercedes Vito
Read More
1 pcs
79,00 €
Weight: 0.10 kg
In stock
Description
steering wheel controls adapter Mercedes
Keep the original steering wheel controls functions when replacing the factory radio with an aftermarket radio.
Depending on the vehicle equipment as well as the range of functions and software of the retrofit device, individual operating functions can be omitted or replaced by other functions.
Compare the plugs of the adapter shown with those in your vehicle and make sure that they fit visually and technically.
Please also check whether one of the specified original factory radios was installed in your vehicle.
Before final assembly, check vehicle functions, vehicle settings and steering wheel controls for function.
Compatibility:
Mercedes Vito (W447) 10/2014 - 02/2019
Mercedes Vito (W447) 05/2019 - 01/2024
Technical details:
CAN Bus
Connector: 40 Pin Quadlock Mercedes Connector
Connection: OEM steering wheel controls 3.5mm jack / loose cable
Connection: +12V continuous current yellow terminal 30 battery fused
Vehicles with Audio 10 / Audio 15 / Audio 30 / Audio 40 OEM Device
Vehicles with Audio 10 OEM device only loud/quiet function supported*
Vehicles with Audio 40 Pioneer OEM Device Remove Pioneer Wiring Harness
Vehicles with Audio 30 Garmin OEM device OEM rear view camera not adaptable
Vehicles with OEM camera:
Rear View Camera Adapter Fakra(m)RCA(m) OEM Camera Article: 771000-2011
Vehicles with E-Call:
E-Call Maintenance Mercedes Sprinter/V-Class Article: 1424-27-0
Reverse gear signal not supported in all vehicles:
Reverse gear signal +12V driver′s side A-pillar 1.5mm white/blue
Dip switch settings for the retrofit device manufacturer (see BDA)
Functions and signals:
Re-import vehicles or vehicles with different software may be incompatible in functions.
red: +12V ignition terminal 15
orange: +12V lighting terminal 58
purple/white: +12V reversing signal
pink: speed signal
green: ground GND handbrake signal
Power handling outputs: 250 mA max.
Current requirement greater than 250 mA:
1 relay coil resistance 75 ohm min.
2 relays coil resistance 150 ohm min.
steering wheel controls
*For more steering wheel controls functions, encode vehicle to Audio 15 OEM device if possible
Keep the original steering wheel controls functions when replacing the factory radio with an aftermarket radio.
Depending on the vehicle equipment as well as the range of functions and software of the retrofit device, individual operating functions can be omitted or replaced by other functions.
Compare the plugs of the adapter shown with those in your vehicle and make sure that they fit visually and technically.
Please also check whether one of the specified original factory radios was installed in your vehicle.
Before final assembly, check vehicle functions, vehicle settings and steering wheel controls for function.
Compatibility:
Mercedes Vito (W447) 10/2014 - 02/2019
Mercedes Vito (W447) 05/2019 - 01/2024
Technical details:
CAN Bus
Connector: 40 Pin Quadlock Mercedes Connector
Connection: OEM steering wheel controls 3.5mm jack / loose cable
Connection: +12V continuous current yellow terminal 30 battery fused
Vehicles with Audio 10 / Audio 15 / Audio 30 / Audio 40 OEM Device
Vehicles with Audio 10 OEM device only loud/quiet function supported*
Vehicles with Audio 40 Pioneer OEM Device Remove Pioneer Wiring Harness
Vehicles with Audio 30 Garmin OEM device OEM rear view camera not adaptable
Vehicles with OEM camera:
Rear View Camera Adapter Fakra(m)RCA(m) OEM Camera Article: 771000-2011
Vehicles with E-Call:
E-Call Maintenance Mercedes Sprinter/V-Class Article: 1424-27-0
Reverse gear signal not supported in all vehicles:
Reverse gear signal +12V driver′s side A-pillar 1.5mm white/blue
Dip switch settings for the retrofit device manufacturer (see BDA)
Functions and signals:
Re-import vehicles or vehicles with different software may be incompatible in functions.
red: +12V ignition terminal 15
orange: +12V lighting terminal 58
purple/white: +12V reversing signal
pink: speed signal
green: ground GND handbrake signal
Power handling outputs: 250 mA max.
Current requirement greater than 250 mA:
1 relay coil resistance 75 ohm min.
2 relays coil resistance 150 ohm min.
steering wheel controls
*For more steering wheel controls functions, encode vehicle to Audio 15 OEM device if possible

