ACV 611094-35-1 2-DIN Kit with pocket Citroen/Fiat/Opel/Peugeot SWC
EAN: 4026724343724
611094-35-1
Radio cover 2-DIN with compartment with radio connection kit steering wheel controls
Citroen / Fiat / Opel / Peugeot
Citroen Jumper / e-Jumper / Relay
FiatFiat 500
Fiat 500L / Doblo / Ducato
Opel Movano Cargo C / Movano Electric Cargo C
Peugeot Boxer / e-Boxer
Read More
1 pcs
173,99 €
Description
Radio cover 2-DIN with compartment with radio connection kit steering wheel controls Citroen / Fiat / Opel / Peugeot
acv premium quality
Many car manufacturers install their own vehicle-specific radios that are visually adapted to the center console.
Installation kits contain all components for replacing an OEM device.
Depending on the vehicle′s equipment, all adapters and interfaces required to operate the retrofit device and restore vehicle functions are included in the scope of delivery.
Please note the installation recommendations for the individual components.
In some cases, not all vehicle functions are supported.
For example, Trailer Assist, E Call or other driving assistance systems.
Before installation, check the OEM device and the vehicle menu for various settings.
Depending on the vehicle equipment as well as the range of functions and software of the retrofit device, individual operating functions can be omitted or replaced by other functions.
Compare the plugs of the adapter shown with those in your vehicle and make sure that they fit visually and technically.
Please also check whether one of the specified original factory radios was installed in your vehicle.
Before final assembly, check vehicle functions, vehicle settings and steering wheel controls for function.
Compatibility:
Citroen
Citroen Jumper (250) 05/2014 - 10/2022*
Citroen Jumper (250) 10/2022 - 06/2024*
Citroen e-Jumper (259) 10/2021 - 06/2024*
Citroen Relay (250) 2006- 2024
FiatFiat 500 (ZAF 312) 07/2016 - 2023
Fiat 500L (ZAF 199) 10/2012 - 07/2017
Fiat 500L (ZAF 199) 07/2017 - 03/2022
Fiat Doblo (ZAF 263) 01/2015 - 06/2022
Fiat Ducato (ZFA 250) 05/2014 - 11/2021*
Opel
Opel Movano Cargo C (Y) 10/2021 - 01/2024*
Opel Movano Electric Cargo C (Y) 10/2021 - 01/2024*
Peugeot
Peugeot Boxer (Y) 09/2014 - 12/2019*
Peugeot Boxer (Y) 08/2018 - 06/2024*
Peugeot e-Boxer (Y) 10/2021 - 06/2024*
Farbe: Klavierlack schwarz
Technical details:
CAN Bus
Connector: 52 pin Fiat connector
Connection: OEM steering wheel controls 3.5mm jack / loose cable
Connection: OEM Antenna Fakra(f) DIN(m)
Connector: OEM Rear View Camera RCA(m) Yellow Rear View Camera Input
Vehicles with Continental 250VP1 / 250VP2 OEM device
Vehicles with UConnect OEM device
Vehicles with Daiichi OEM device*
steering wheel controls buttons:
2 x 4 radio control functions front steering wheel
Vehicles with Fault Display Trip Meter after Installation Dip Switch Position Under the Board:
Adjust dip switch position without voltage
Dip switch 1 on / Dip switch 2 off / open or close white cable protector
Dip switch 1 off / Dip switch 2 on / open or close white cable protector
Dip Switch 6 on 250VP1 OEM HU
Dip Switch 5 on 250VP2 OEM HU
Open White Cable Protector Blue&Me OEM Function
Dip Switch 1 off / Dip Switch 2 off / Cable Protector White Open Daiichi OEM Device
Calming down after the changeover of the CAN bus
Vehicles with persistent error display and other software package not compatible
On-board computer vehicle settings not supported**
High-beam assistant not supported
Driving assistance systems not supported
Date/time setting not supported**
Vehicles with OEM Rear View Camera Assignment OEM Plug:
red: Pin 31 Video+
White: Pin 32 Video -
black: Pin 33 shielding
Dip switch settings for the retrofit device manufacturer (see BDA)
Functions and signals:
Re-import vehicles or vehicles with different software may be incompatible in functions.
red: +12V ignition terminal 15
orange: +12V lighting terminal 58
purple/white: +12V reversing signal
pink: speed signal
green: ground GND handbrake signal
Power handling outputs: 250 mA max.
Current requirement greater than 250 mA:
1 relay coil resistance 75 ohm min.
2 Ralais Coil Impedance 150 Ohm min.
steering wheel controls
*Vehicles with Daiichi OEM device disassemble wiring harness black cables adapter wiring harness radio bay driver′s side
*Vehicles with directly wired OEM Daiichi device colored cables not compatible Item: 42A-1094-018
**On-board computer vehicle settings:
2-DIN Kit with Compartment Citroen/Fiat/Opel/Peugeot Infodapter Article: 61-1094-35-2
Scope of delivery:
2-DIN radio cover with compartment Citroen/Fiat/Opel/Peugeot Article: 281094-35-1
LFB Citroen/Fiat/Opel/Peugeot VP1/VP2/Daiichi Multilead bulk Item:42xfa019-0
Antenna adapter Fakra(m)DIN(m) passive loose Article: 1524-01-0
Optional:
Storage compartment INBAY® for 2-DIN panels screwable 5W article: 241000-10-1
acv premium quality
Many car manufacturers install their own vehicle-specific radios that are visually adapted to the center console.
Installation kits contain all components for replacing an OEM device.
Depending on the vehicle′s equipment, all adapters and interfaces required to operate the retrofit device and restore vehicle functions are included in the scope of delivery.
Please note the installation recommendations for the individual components.
In some cases, not all vehicle functions are supported.
For example, Trailer Assist, E Call or other driving assistance systems.
Before installation, check the OEM device and the vehicle menu for various settings.
Depending on the vehicle equipment as well as the range of functions and software of the retrofit device, individual operating functions can be omitted or replaced by other functions.
Compare the plugs of the adapter shown with those in your vehicle and make sure that they fit visually and technically.
Please also check whether one of the specified original factory radios was installed in your vehicle.
Before final assembly, check vehicle functions, vehicle settings and steering wheel controls for function.
Compatibility:
Citroen
Citroen Jumper (250) 05/2014 - 10/2022*
Citroen Jumper (250) 10/2022 - 06/2024*
Citroen e-Jumper (259) 10/2021 - 06/2024*
Citroen Relay (250) 2006- 2024
FiatFiat 500 (ZAF 312) 07/2016 - 2023
Fiat 500L (ZAF 199) 10/2012 - 07/2017
Fiat 500L (ZAF 199) 07/2017 - 03/2022
Fiat Doblo (ZAF 263) 01/2015 - 06/2022
Fiat Ducato (ZFA 250) 05/2014 - 11/2021*
Opel
Opel Movano Cargo C (Y) 10/2021 - 01/2024*
Opel Movano Electric Cargo C (Y) 10/2021 - 01/2024*
Peugeot
Peugeot Boxer (Y) 09/2014 - 12/2019*
Peugeot Boxer (Y) 08/2018 - 06/2024*
Peugeot e-Boxer (Y) 10/2021 - 06/2024*
Farbe: Klavierlack schwarz
Technical details:
CAN Bus
Connector: 52 pin Fiat connector
Connection: OEM steering wheel controls 3.5mm jack / loose cable
Connection: OEM Antenna Fakra(f) DIN(m)
Connector: OEM Rear View Camera RCA(m) Yellow Rear View Camera Input
Vehicles with Continental 250VP1 / 250VP2 OEM device
Vehicles with UConnect OEM device
Vehicles with Daiichi OEM device*
steering wheel controls buttons:
2 x 4 radio control functions front steering wheel
Vehicles with Fault Display Trip Meter after Installation Dip Switch Position Under the Board:
Adjust dip switch position without voltage
Dip switch 1 on / Dip switch 2 off / open or close white cable protector
Dip switch 1 off / Dip switch 2 on / open or close white cable protector
Dip Switch 6 on 250VP1 OEM HU
Dip Switch 5 on 250VP2 OEM HU
Open White Cable Protector Blue&Me OEM Function
Dip Switch 1 off / Dip Switch 2 off / Cable Protector White Open Daiichi OEM Device
Calming down after the changeover of the CAN bus
Vehicles with persistent error display and other software package not compatible
On-board computer vehicle settings not supported**
High-beam assistant not supported
Driving assistance systems not supported
Date/time setting not supported**
Vehicles with OEM Rear View Camera Assignment OEM Plug:
red: Pin 31 Video+
White: Pin 32 Video -
black: Pin 33 shielding
Dip switch settings for the retrofit device manufacturer (see BDA)
Functions and signals:
Re-import vehicles or vehicles with different software may be incompatible in functions.
red: +12V ignition terminal 15
orange: +12V lighting terminal 58
purple/white: +12V reversing signal
pink: speed signal
green: ground GND handbrake signal
Power handling outputs: 250 mA max.
Current requirement greater than 250 mA:
1 relay coil resistance 75 ohm min.
2 Ralais Coil Impedance 150 Ohm min.
steering wheel controls
*Vehicles with Daiichi OEM device disassemble wiring harness black cables adapter wiring harness radio bay driver′s side
*Vehicles with directly wired OEM Daiichi device colored cables not compatible Item: 42A-1094-018
**On-board computer vehicle settings:
2-DIN Kit with Compartment Citroen/Fiat/Opel/Peugeot Infodapter Article: 61-1094-35-2
Scope of delivery:
2-DIN radio cover with compartment Citroen/Fiat/Opel/Peugeot Article: 281094-35-1
LFB Citroen/Fiat/Opel/Peugeot VP1/VP2/Daiichi Multilead bulk Item:42xfa019-0
Antenna adapter Fakra(m)DIN(m) passive loose Article: 1524-01-0
Optional:
Storage compartment INBAY® for 2-DIN panels screwable 5W article: 241000-10-1