ACV 42xar005-0 Steering wheel adapter Alfa/Citroen/Fiat/Opel/Peugeot 52Pin Multilead lose
EAN: 4026724344981
42xar005-0
Make your original steering wheel controls work with your new car stereo
Alfa 4C / Alfa Romeo Giulietta
Alfa Romeo MiTo
Read More
1 pcs
79,00 €
Description
Specifications
Keep the original steering wheel remote control functions when replacing the factory radio with a retrofit HU.
Depending on the vehicle equipment as well as the range of functions and software of the retrofit HU, individual operating functions may be omitted or replaced by other functions.
Compare the pictured harness connectors with the connectors in your car and make sure that they fit optically and technically.
Depending on the vehicle equipment as well as the range of functions and software of the retrofit HU, individual operating functions may be omitted or replaced by other functions.
Compare the pictured harness connectors with the connectors in your car and make sure that they fit optically and technically.
Note:
CAN Bus
connector: 52 Pin Fiat
connector: OEM SWC 3,5mm Jack / loose wire
connector: OEM rear view camera RCA(m) yellow rear viev camera input
date/time settings not supported
vehicle settings not supported
vehicles with OEM rear view camera OEM connector:
red: Pin 31 Video+
white: Pin 32 Video -
black: Pin 33 shield
dip switch settings for the retrofit device manufacturer (look into the manual)
Vehicle application:
Alfa 4C (960) 01/2014 - 08/2018*
Alfa Romeo Giuletta (940) 10/2013 - 04/2016
Alfa Romeo Giuletta (940) 04/2016 - 12/2021*
Alfa Romeo MiTo (955) 12/2013 - 08/2016
Alfa Romeo MiTo (955) 08/2016 - 08/2018
Following signals are provided:
Reimported vehicles or vehicles with different software may be incompatible in functions.
red: +12V ignition clamp 15
orange: +12V illumination clamp 58
purple/white: +12V reverse gear signal
pink: speed pulse signal
green: GND park brake signal
load capacity outputs: 250 mA max.
current requirement more than 250 mA:
1 relay coil resistance 75 Ohm min.
2 relays coil resistance 150 Ohm min.
SWC
*vehicles with Continental touch screen OEM HU
CAN Bus
connector: 52 Pin Fiat
connector: OEM SWC 3,5mm Jack / loose wire
connector: OEM rear view camera RCA(m) yellow rear viev camera input
date/time settings not supported
vehicle settings not supported
vehicles with OEM rear view camera OEM connector:
red: Pin 31 Video+
white: Pin 32 Video -
black: Pin 33 shield
dip switch settings for the retrofit device manufacturer (look into the manual)
Vehicle application:
Alfa 4C (960) 01/2014 - 08/2018*
Alfa Romeo Giuletta (940) 10/2013 - 04/2016
Alfa Romeo Giuletta (940) 04/2016 - 12/2021*
Alfa Romeo MiTo (955) 12/2013 - 08/2016
Alfa Romeo MiTo (955) 08/2016 - 08/2018
Following signals are provided:
Reimported vehicles or vehicles with different software may be incompatible in functions.
red: +12V ignition clamp 15
orange: +12V illumination clamp 58
purple/white: +12V reverse gear signal
pink: speed pulse signal
green: GND park brake signal
load capacity outputs: 250 mA max.
current requirement more than 250 mA:
1 relay coil resistance 75 Ohm min.
2 relays coil resistance 150 Ohm min.
SWC
*vehicles with Continental touch screen OEM HU